Basic Information

Module Introduction

Core Functions 核心功能

1. 8 路独立软件可组态通道，单通道可自由配置：数字输入 DI、数字输出 DO、4~20mA 模拟输入、0~10V 模拟输出、电位计信号采集
2. 8 fully software-configurable channels, support DI/DO, 4~20mA AI, 0~10V AO, potentiometer signal
3. 双路冗余 RBUS A/B 总线通讯，单总线断线自动切换备用链路，保障船舶安全监控不中断
4. Dual redundant RBUS A/B bus, automatic switchover upon single line loss for safety-critical marine monitoring
5. 通道间独立电气隔离，1500VAC 隔离耐压，抵御机舱变频器、发电机强电磁干扰与浪涌
6. Per-channel galvanic isolation (1500VAC withstand), resist EMI & surge from marine generators & VFDs
7. 支持在线热插拔，更换模块无需切断现场传感器线缆、无需停机停控机舱监控系统
8. Hot-swap design, ｒｅｐｌａｃｅ module without disconnecting field cables or stopping engine monitoring
9. 前面板状态诊断 LED：RUN 运行绿灯、FAULT 故障红灯，快速定位总线失联、通道短路、供电异常
10. Front panel RUN/FAULT LEDs for quick troubleshooting of bus loss, channel short & power failure
11. 两位十进制拨码地址设置，总线地址范围 1~99，单 RBUS 链路最多串联 99 台 RMP201 系列模块
12. 2-digit DIP address switch (1~99), max 99 modules on one RBUS trunk
13. 16 位高精度 ADC 模拟采集，4~20mA 信号采集精度 ±0.05% FS，精准监测液位、压力、温度变送器
14. 16-bit high precision ADC, ±0.05%FS accuracy for level, pressure & temperature transmitters
15. 海事级硬件防护，全板三防涂层，耐受船舱盐雾、冷凝高湿、持续振动工况
16. Marine-grade conformal coated PCB, resistant to salt fog, condensation & continuous vessel vibration