Basic Information

模块产品介绍 Module Introduction

Core Functions 核心功能

1. 多类型信号仿真输出：加速度模拟波形、RTD 热电阻温度、24V 开关量、点火回路反馈、编码器脉冲信号
2. Multi-type signal generation: crash acceleration waveform, RTD temperature, 24V binary signal, squib feedback, encoder pulse
3. 可编程故障注入功能：通道断线、短路、信号偏移、CAN 报文丢失 / 篡改，快速验证 ACU 故障保护逻辑
4. Configurable fault injection: open/short circuit, signal offset, CAN message tampering, verify ACU safety protection logic
5. 内置标准碰撞波形库，支持导入自定义实车碰撞数据，复现正面 / 侧面 / 柱碰各类工况
6. Built-in standard crash waveform library, support custom real crash data import for frontal/side/pole collision simulation
7. 多通道同步时序输出，毫秒级同步控制多组传感器信号，高度还原真实碰撞动态时序
8. Multi-channel synchronous timing output, ms-level synchronization to restore real vehicle crash dynamic sequence
9. 背板高速总线与 Autoliv B0110 网关联动，CAN/Ethernet 双向交互，上位软件远程下发仿真参数
10. High-speed backplane bus linked with B0110 gateway, CAN/Ethernet bidirectional communication for remote parameter setup
11. 全通道硬件自诊断，实时识别通道过载、短路、背板供电异常，面板 LED 直观告警
12. Full-channel hardware self-diagnosis, front LED alarm for overload, short circuit & rack power fault
13. 本地事件日志存储，记录全部仿真工况、故障注入动作，用于标定数据溯源与报告导出
14. Local event log storage, record all simulation & fault actions for calibration traceability
15. 车载级宽温硬件，-40℃~+85℃稳定输出高精度信号，适配高低温环境舱测试场景
16. Automotive wide-temperature hardware, stable high-precision output -40℃~+85℃ for thermal chamber testing