Kollmorgen AKM32C-ANC2AB00 晶体管控制器

模块背板从后面连接到19"模块中。晶体管控制器插入模块并插入背板，电信号通过端子、螺柱和平针连接器在背面板上提供。

The  -module backplane connects into the 19" module from the rear. The transistor controller is inserted into the module and plugged into the backplane, and electrical signals are provided on the backplane via terminals, studs and flat pin connectors.

避免烧坏触点,甚至毁坏控制器中的整个电路模块,以及避免充满电的电容器造成人危险至关重要。电容器中的残余电荷在超过120秒后，仍可能达到危险水平。关闭主电源后，仅当电压低于最小阈值水平时才连接或断开控制器。电源电压关闭后，观察控制器中的LED。短时间后，绿色LED 将熄灭，红色LED 将短暂亮起，现在您可以拔出或插入控制器。

It is essential to avoid burning out contacts or even destroying the entire circuit module in the controller, as well as avoiding the danger to people posed by a fully charged capacitor. The residual charge in the capacitors may still reach dangerous levels after more than 120 seconds. After switching off the mains supply, connect or disconnect the controller only when the voltage is below the minimum threshold level. After the mains voltage has been switched off, observe the LEDs in the controller. after a short period of time the green LED will go out, the red LED will light up briefly and you can now unplug or plug in the controller.

科尔摩根为更雄心勃勃的机器引入了下一代运动，这些机器基于更强大的性能和更自信的工程设计，科尔摩根2G运动系统利用了我们领先伺服电机和完美匹配驱动器的全部性能潜力，旨在提供无与伦比的功率密度和控制，结果是在紧凑的占地面积内显着增强了扭矩、响应能力和SafeMotion功能，从而实现了轻松的安装和全面的灵活性。

Kollmorgen introduces the next generation of motion for more ambitious machines based on more powerful performance and more confident engineering, the Kollmorgen 2G Motion System utilises the full performance potential of our leading servo motors and perfectly matched drives designed to deliver unrivalled power density and control, the result is significantly enhanced torque, responsiveness and SafeMotion functionality in a compact footprint for easy installation and total flexibility.