Module Type Introduction

Core Functions

1. Universal wide AC input 85~264VAC 50/60Hz, automatic voltage adaptation without manual adjustment
2. 85~264VAC 宽幅通用交流输入 50/60Hz，电压自适应无需手动调节
3. 750W high-power stable DC output, fixed 24VDC output, max 31.25A continuous load capacity
4. 750W 大功率稳定直流输出，固定 24VDC 输出，最大 31.25A 持续带载能力
5. Support 1+1 / N+1 redundant parallel hot standby, automatic load balance, faulty unit offline without power loss
6. 支持 1+1/N+1 冗余并联热备，自动均流，故障单元离线不中断系统供电
7. Multi-layer hardware safety protection: overvoltage lockout, short circuit auto-recovery, over-temperature shutdown, reverse input surge protection
8. 多层硬件安全防护：过压闭锁、短路自动恢复、超温停机、输入反接浪涌全回路保护
9. Intelligent temperature-controlled cooling fan, low-speed silent operation under light load, high-speed heat dissipation under heavy load to extend service life
10. 智能温控散热风扇，轻载低速静音运行，重载高速散热，延长整机使用寿命
11. Real-time hardware self-diagnosis, front panel LED indicators display power normal, overload, overheat and internal failure status
12. 实时硬件自诊断，面板 LED 指示灯实时显示供电正常、过载、超温、内部故障状态
13. Standard fault alarm relay contact, upload power abnormality signal to DCS/SCADA for remote monitoring
14. 标准故障报警继电器触点输出，将电源异常信号上传 DCS/SCADA 远程监控
15. Hot pluggable design, ｒｅｐｌａｃｅ faulty power module without shutting down the whole safety system
16. 支持热插拔设计，更换故障电源无需整体停运安全系统