3500/44M 瞬态数据接口模块

尽管TDI为整个机架提供了某些通用功能，但它不是关键监控路径的一部分，并且不会对用于自动机械保护的整个监控系统的正确、正常操作产生影响。每个3500机架需要一个TDI或RIM，它们总是占据插槽1(电源旁边)

Although the TDI provides some common functionality throughout the rack, it is not part of the critical monitoring path and has no impact on the correct and proper operation of the entire monitoring system used for automatic mechanical protection. One TDI or RIM is required per 3500 rack, and they always occupy slot 1 (next to the power supply)

TDI位于与3500机架的电源相邻的插槽中。可与M系列显示器(3500/40M、3500/42M等)接口连续采集稳态和瞬态动态(波形)数据，并通过以太网链路将这些数据传递到主机软件。有关详细信息，请参阅本文档末尾的兼容性部分。

The TDI is located in a slot adjacent to the power supply of the 3500 rack. It can be interfaced with M-Series displays (3500/40M, 3500/42M, etc.) to continuously collect steady-state and transient dynamic (waveform) data and pass this data to the host software over an Ethernet link. For more information, see the Compatibility section at the end of this document.

静态数据捕获能力是TDI的标准配置，但是，使用可选的SYSTE通道启用磁盘将允许TDI捕获动态和高分辨率的瞬态数据。TDI在3500机架内集成了通信处理器功能

Static data capture capability is standard on the TDI, however, the use of the optional SYSTE Channel Enable Disk will allow the TDI to capture dynamic and high-resolution transient data. the TDI integrates communications processor functionality within the 3500 rack.