3500/42M（176449-02） 框架接口模块

RIM支持兼容的Bently Nevada外部通信处理器，如TDXnet、TDIx和DDIX。虽然RIM为整个机架提供某些通用功能，但RIM不是关键监控路径的一部分，对整个监控系统的正常运行没有影响。每个机架需要一个RIM

RIM supports compatible Bently Nevada external communications processors such as TDXnet, TDIx, and DDIX.While the RIM provides some common functionality for the entire rack, theWhile RIM provides some common functionality for the entire rack, RIM is not part of the critical monitoring path and has no impact on the normal operation of the entire monitoring system.RIMs are not part of the critical monitoring path and have no impact on the normal operation of the entire monitoring system. One RIM is required per rack

机架接口模块(RIM)是3500机架的主要接口。它支持用于配

置机架和检索机器信息的专有协议。RIM必须位于机架的插槽I

中(电源旁边)。

The Rack Interface Module (RIM) is the primary interface for the 3500 rack. It supports a proprietary protocol for configuring the rack and retrieving machine information.The RIM must be located in slot I of the rack (next to the power supply).The RIM must be located in slot I of the rack (next to the power supply).

对于三模块冗余(TMR)应用，3500系统需要一个TMR版本的RIM。除了所有标准的RIM功能外，TMR RIM还执行"监视通道比较"。“3500TMR配置使用监视器选项中指定的设置实现监视器投票。使用这种方法，TMR RIM不断比较来自三(3)个冗余监视器的输出。如果TMR RIM检测到来自其中一个监视器的信息不再处于另外两个监视器的信息的配置百分比内，它将标记该监视器出错，并在系统事件列表中放置一个事件

For Triple Module Redundancy (TMR) applications, the 3500 system requires a TMR version of the RIM.In addition to all standard RIM functions, the TMR RIM performs a "monitor channel comparison". "3500 TMR configurations implement monitor polling using the settings specified in the Monitor Options. Using this method, the TMR RIM continuously compares the output from three (3) redundant monitors. If TMR RIM detects that the information from one of the monitors is no longer within the configured percentage of the information from the other two monitors, it flags the monitor as being in error and places an event in the system event list