Bantly 3500/32M 通道继电器模块

Short Description:

Bantly 3500/32M 通道继电器模块3500/32M 通道继电器模块是一个全高度模块,提供四个继电器输出。任何数量的4通道继电器模块可以放置在瞬态数据...


产品详情

产品标签

Bantly 3500/32M 通道继电器模块

3500/32M 通道继电器模块是一个全高度模块,提供四个继电器输出。任何数量的4通道继电器模块可以放置在瞬态数据接口模块右侧的任何插槽中。4通道继电器模块的每个输出可独立编程以执行投票逻辑

3500/32M The Channel Relay Module is a full height module providing four relay outputs. Any number of 4-channel relay modules can be placed in any of the slots on the right side of the Transient Data Interface Module. each output of the 4-channel relay module can be programmed independently to perform polling logic

3500-32.jpg

3500/32M 报警驱动逻辑的编程使用ANDOR逻辑,并可以使用报警输入(报警和危险状态)OK,或机架中任何监视器通道或任何监视器通道组合的单个PPL。您可以使用3500机架配置软件对报警驱动器进行编程,以满足您的应用需求

3500/32M Alarm driver logic is programmed using AND and OR logic, and can use alarm inputs (alarm and hazard status) not OK, or a single PPL for any monitor channel or any combination of monitor channels in the rack You can use the 3500 Rack Configuration Software to program the alarm driver to meet the needs of your application

3500-32 (1).jpg

3500/32M 如果3500/32M是功能安全(SIL)系统的一部分,则功能安全证书要求限制电压。功能安全(SIL)系统不允许使用更高的电压。

3500/32M If the 3500/32M is part of a Functional Safety (SIL) system, the Functional Safety Certificate requires voltage limitation. Higher voltages are not permitted for functional safety (SIL) systems.


联系我们

留言


在这里写下您的信息并发送给我们

留言