Bantly 3500/32-01-00 4通道继电器模块

3500/32-01-00 报警驱动逻辑的编程使用AND和OR逻辑，并可以使用报警输入(报警和危险状态)不OK，或机架中任何监视器通道或任何监视器通道组合的单个PPL。您可以使用3500机架配置软件对报警驱动器进行编程，以满足您的应用需求

3500/32-01-00 Alarm driver logic is programmed using AND and OR logic, and can use alarm inputs (alarm and hazard status) not OK, or a single PPL for any monitor channel or any combination of monitor channels in the rack You can use the 3500 Rack Configuration Software to program the alarm driver to meet the needs of your application

3500/32-01-00 通道继电器模块是一个全高度模块，提供四个继电器输出。任何数量的4通道继电器模块可以放置在瞬态数据接口模块右侧的任何插槽中。4通道继电器模块的每个输出可独立编程以执行投票逻辑

3500/32-01-00 The Channel Relay Module is a full height module providing four relay outputs. Any number of 4-channel relay modules can be placed in any of the slots on the right side of the Transient Data Interface Module. each output of the 4-channel relay module can be programmed independently to perform polling logic

3500/32-01-00 可以将现场接线连接到3500/32M继电器，使导体暴露于潜在的人类接触。在高电压下，这可能会造成电击危险。用户只能在规定的电压下使用3500/32M继电器。必须针对冲击危险采取适

当的安全预防措施。

3500/32-01-00 It is possible to connect field wiring to the 3500/32M relay, exposing the conductors to potential human contact. At high voltages, this can create a shock hazard. The user should only use the 3500/32M relay at the specified voltage. Appropriate safety precautions must be taken against the shock hazard.Appropriate safety precautions must be taken for shock hazards.