Bently 3500/25-01-02-00 改进的键相器模块

3500/25-01-02-00 增强键相模块是一个改进的3500系统模块。与之前的设计相比，它提供了扩展的Keyphaspr信号处理功能，同时在形式、装配和功能方面保持了与现有Keyphasor模块的完全向下兼容性，以用于传统系统。键相量模块PWA125792-01被更新后的149369-01模块完全取代

3500/25-01-02-00 The Enhanced Keyphasor Module is an improved module for the 3500 system. It provides extended Keyphaspr signal processing capabilities compared to the previous design, while maintaining full backward compatibility in form, fit and function with existing Keyphasor modules for use in legacy systems. The Keyphasor module PWA125792-01 was completely replaced by the updated 149369-01 module

3500/25-01-02-00 当一个系统的Keyphasor输入需要三模冗余(TMR)的应用，3500系统应采用两个Keyphasor模块。在这种配置中，模块并行工作，为机架中的其他模块提供初级和次级密钥相量信号.

3500/25-01-02-00   When a system's Keyphasor inputs require Triple Mode Redundancy (TMR) applications, the 3500 system should use two Keyphasor modules. In this configuration, the modules operate in parallel to provide primary and secondary Keyphasor signals to other modules in the rack.

3500/25-01-02-00 增强型Keyphasor模块是一个半高、双通道模块，用于向3500机架中的监视器模块提供Keyphasor信号。该模块接收来3500/25自接近探头或磁性传感器的输入信号，并将信号转换为数字键相关橱+5包减块量信号，当轴上的键相量标记与键相量传感器一致时，该信号会指示键相量。3500机械保护系统可以接受多达四个Keyphasor信号正常配置和多达八个Keyphasor在pairec配置信号。

The 3500/25 Enhanced Keyphasor Module is a half-height, two-channel module used to provide Keyphasor signals to the monitor module in the 3500 rack. The module receives input signals from the 3500/25 from proximity probes or magnetic sensors and converts the signals to a digital key-related cabinet +5 packet minus block volume signal that indicates the keyphasor volume when the keyphasor markings on the shaft are in line with the keyphasor sensor.The 3500 Mechanical Protection System can accept up to four Keyphasor signals for normal configurations and up to eight Keyphasor signals in the pairec configuration signals.