Bently 3500/25-01-01-00 改进的键相器模块

3500/25-01-01-00 当一个系统的Keyphasor输入需要三模冗余(TMR)的应用，3500系统应采用两个Keyphasor模块。在这种配置中，模块并行工作，为机架中的其他模块提供初级和次级密钥相量信号.

3500/25-01-01-00  When a system's Keyphasor inputs require Triple Mode Redundancy (TMR) applications, the 3500 system should use two Keyphasor modules. In this configuration, the modules operate in parallel to provide primary and secondary Keyphasor signals to other modules in the rack.

3500/25-01-01-00 增强键相模块是一个改进的3500系统模块。与之前的设计相比，它提供了扩展的Keyphaspr信号处理功能，同时在形式、装配和功能方面保持了与现有Keyphasor模块的完全向下兼容性，以用于传统系统。键相量模块PWA125792-01被更新后的149369-01模块完全取代

3500/25-01-01-00  The Enhanced Keyphasor Module is an improved module for the 3500 system. It provides extended Keyphaspr signal processing capabilities compared to the previous design, while maintaining full backward compatibility in form, fit and function with existing Keyphasor modules for use in legacy systems. The Keyphasor module PWA125792-01 was completely replaced by the updated 149369-01 module

3500/25-01-01-00  键相量信号是来自旋转轴或齿轮的一次或每转多个事件的脉冲，用于提供精确的定时测量。这使得3500监控模块和外部诊断设备可以测量轴的转速和矢量参数，如Ix振幅和相位。

3500/25-01-01-00  Keyed phase signals are pulses from rotating shafts or gears at one time or multiple events per revolution and are used to provide accurate timing measurements. This allows the 3500 Monitoring Module and external diagnostic equipment to measure shaft speed and vector parameters such as Ix amplitude and phase.