Bently 3500/053500/05-01-02-00-00-01 框架

灵敏度:当正确地终止并定位在校准角时，在100 Hz(6,000 cpm)时为20mV/mm/s(500mV/in/s) ±5%，在100 Hz(6,000 cpm)时为25 mm/s(1in/s) 零到峰值±5%频率响应:从小工作频率(参见订货信息)到1 kHz (60,000 cpm); 典型值从+0 到±3dB引线长度:在bently 9200和3300监测器之间长305米(1,000 英尺)。长度增加时的频率衰减.使用和存储温度:9200:-29℃到+121C (-20°F 到+250°F) 74712:-29°C到+204°C (-20F到+400°F)速度-位移转换器:型号9513 要求:-18 Vdc;型号46687 要求:-24Vdc,输出灵敏度(输入为500 mV/in/s)9513-02:200mV/mil (8 V/mm) ±5% ;46687-01: 200 mV/mil (8 V/mm)±5%频率范围:小工作频率到10 kHz(600,000cpm)9200两线速度传感器可以与9513 VDC一起使用。

Sensitivity: 20 mV/mm/s (500 mV/in/s) ±5% at 100 Hz (6,000 cpm) when properly terminated and positioned at the calibration angle, 25 mm/s (1in/s) at 100 Hz (6,000 cpm) Zero to Peak ±5% Frequency Response: From small operating frequency (see ordering information) to 1 kHz (60, 000 cpm); typical from +0 to ±3 dB Lead Length: 305 m (1,000 ft) between bently 9200 and 3300 monitors. 000 cpm); +0 to ±3dB typical Lead length: 305 metres (1,000 feet) between bently 9200 and 3300 monitors. Frequency attenuation as length increases. Operating and Storage Temperatures: 9200: -29°C to +121°C (-20°F to +250°F) 74712: -29°C to +204°C (-20°F to +400°F) Velocity-Displacement Converters: Model 9513 Requirements: -18 Vdc; Model 46687 Requirements: -24 Vdc, Output Sensitivity (500 mV/in/s input) 9513-02: 200 mV/mil (8 V/mm) ±5% ;46687-01: 200 mV/mil (8 V/mm) ±5%Frequency range: low operating frequency to 10 kHz (600,000 cpm)The 9200 two-wire velocity sensor can be used with the 9513 VDC.

Bently 3500/053500/05-01-02-00-00-01 框架用于安装所有的监测器模块和框架电源。它为3500各个框架之间的互相通讯提供背板通讯，并为每个模块提供所要求的电源。

The Bently 3500/053500/05-01-02-00-00-01  frame is used to mount all monitor modules and frame power supplies. It provides backplane communications for the 3500 frames to communicate with each other and provides the required power supply for each module.communication between the 3500 frames and provides the required power supply for each module.

Bently 3500/053500/05-01-02-00-00-01 系统集成了众多的自我监测功能，可以识别故障的监测模块和它们连接的传感器，识别和识别问题，通过适当的错误代码，并抑制通道操作时，故障可能危及系统的正确运作。

The Bently 3500/053500/05-01-02-00-00-01  system incorporates numerous self-monitoring features that identify faulty monitoring modules and the sensors to which they are connected, recognising and identifying problems by means of appropriate error codes and suppressing channel operation when faults may jeopardise the correct operation of the system.